Now that I have had some time in the shop I started working on the Jelly Cupboard Build again. I need to get that out of the shop so I can get reorganized and cleaned up to start the WIWW nightstand/beach house nightstand.
I thought I would post a few pics of that I was able to get done tonight.
Drum roll please…………
I did it. It’s done all the pictures are done for the Miter Saw tuning post. I can’t believe it.
Okay So here we go.
First and foremost when you start this process :
PLEASE READ, FOLLOW, AND UNDERSTAND THE USE AND SAFETY INSTRUCTIONS FOR YOUR SAW AND ALWAYS WEAR YOUR SAFETY GLASSES AND I RECOMMEND HEARING PROTECTION.
MAKE SURE THAT YOUR SAW IS UNPLUGGED DURING THE FIRST SEVERAL PARTS OF THIS TUTORIAL.
Okay now that I have that out of the way. Seriously please take care of yourself and watch what you are doing.
Squaring the Blade to the Fence:
You will need a speed square or some kind of accurate square that you can check 90° and 45°.
Make sure your saw is set and locked at the 0° take your square and lay it on the table to check for 90° make sure the it is flush against the fence. You are looking to make sure there is no gap between the square and the blade. Make sure that you don’t put to much pressure on the blade as it can cause it to deflect.
I am currently reading Make Your Own Guitar by Melvyn Hiscock. I am prepping myself as best I can for my first guitar build. This is hopefully the start of a Career. I’m hoping that over the next 10 years I can develop my skill at building guitars and make a Full Time career of it. It’s a tough business to get into especially competing with the Big dogs out there but I still believe there is a good market for Custom Built and Hand Built Guitars both Acoustic and electric. Like most things I have decided to just teach myself at least in the beginning. I’m sure I will take some classes down the road but for now it’s full steam ahead.
Tomorrow night I plan to go into the shop and finally knock out the post on Tuning a Miter Saw. I hope to have that up tomorrow night or Thursday. Once that post is done I will start on the WIWW Nightstand build and start the post with that. I want to break up each section into it’s own post so you have a step by step guide to building the nightstand. Sorry it has been taking so long on this. I know I got everyone all excited with the Series. I had some really great responses. April is about over and all of my commitments are mostly taken care of so I can spend some time focusing on the series and getting it done right for you.
On a side note…. In a jonesing for something woodworking I tackled a new type of woodworking tonight. Well not so much new as it was adapting some current skills into producing something else. I am excited about it and will post about that as well in the future but for now it is going to be a closely held secret. I think you will find it interesting as well. Tonight was mostly prototyping and figuring out how I wanted to do things. I still have a lot of figuring out to do on the project but think I am well on my way.
I also got to spend sometime in the shop with Grover Jr. tonight. We had a Parent/Child Project that we completed tonight from Home Depot. It was a little shelf kit with the number 20 Home Depot Car. Pretty neat. If you want to spend some quality time with you son or daughter I highly HIGHLY recommend the Lowes Build And Grow Program. I took Grover Jr. to one a few weeks back and we built a Kaleidoscope. There was just something very cool about spending sometime with him just the two of us sharing something that I love with him and seeing him enjoy it.
Here are some pictures after a successful morning of building.
He is a trip. We never could get him to stop making faces. I really totally so don’t know where he gets it from.
